| PART |
Description |
Maker |
| ZSH330_03 ZSH330 ZSH330C ZSH330G ZSH33003 |
Reset High Monitor-Not recommended for new designs
SUPPLY VOLTAGE MONITOR
|
ZETEX[Zetex Semiconductors]
|
| ZSH560_03 ZSH560 ZSH560C ZSH560G |
Reset High Monitor-Not recommended for new designs
SUPPLY VOLTAGE MONITOR
|
ZETEX[Zetex Semiconductors]
|
| P4C188-35LC P4C188-17PC P4C188L-17PC P4C188-20CM |
2-Wire Serial Temp Sensor/Thermal Monitor, -55C to 125C, 8-SOIC 150mil, T/R x4的SRAM
Microprocessor 3.08V Reset Monitor, -40C to 85C, 3-SOT-23, T/R x4的SRAM
x4 SRAM x4的SRAM
Microprocessor 3.08V Reset Monitor, -40C to 125C, 3-SOT-23, T/R x4的SRAM
|
Pyramid Semiconductor, Corp.
KEMET Corporation
|
| TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶???????
IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC
The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
| MAX814 MAX814C MAX815 MAX815C MAX815CPA MAX815CSA |
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector.
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit.
【1% Accuracy, Low-Power, 3V and 5V レP Supervisory Circuits
1% Accuracy Low-Power 3V and 5V P Supervisory Circuits
1% Accuracy, Low-Power, 3V and 5V P Supervisory Circuits
±1% Accuracy, Low-Power, 3V and 5V μP Supervisory Circuits
??% Accuracy, Low-Power, 3V and 5V ?? Supervisory Circuits
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector.
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit.
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
MAXIM INTEGRATED PRODUCTS INC
|
| NCP803SN293T3G NCP803SN293T3 |
Very Low Supply Current 3-Pin Microprocessor Reset Monitor
2.93V Very Low Supply Current 3-Pin Microprocessor Reset Low Monitor with Open Drain N-Channel output; Package: SOT-23 (TO-236) 3 LEAD; No of Pins: 3; Container: Tape and Reel; Qty per Container: 10000 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
|
ON Semiconductor
|
| ASM1232LPS ASM1232LPSN-2 ASM1232LPSN-2F ASM1232LPS |
5V μP Power Supply Monitor and Reset Circuit
5V 楼矛P Power Supply Monitor and Reset Circuit
|
PulseCore Semiconductor
|
| MAX811 MAX811EUS-T MAX811-MAX812 MAX812EUS-T MAX81 |
Microprocessor voltage monitor with manual reset input. Reset threshold voltage 4.38V
Hex D-type Flip-Flops With Clear 16-CDIP -55 to 125
4-Pin レP Voltage Monitors with Manual Reset Input
4-Pin P Voltage Monitors with Manual Reset Input
|
Maxim Integrated Products, Inc.
MAXIM - Dallas Semiconductor
|
| NCV8501 NCV8501D33G NCV8501DADJ NCV8501D100 NCV850 |
Micropower 150 mA LDO Linear Regulators with ENABLE, DELAY, RESET, and Monitor FLAG 3.3 V FIXED POSITIVE LDO REGULATOR, 0.15 V DROPOUT, PDSO8
Micropower 150 mA LDO Linear Regulators with ENABLE / DELAY / RESET / and Monitor FLAG
|
可调正电压单路输出LDO稳压
ONSEMI[ON Semiconductor]
|
| MAX700C_D MAX70008 MAX700C/D MAX700CPA MAX701C/D M |
Power-Supply Monitor with Reset
|
Maxim Integrated Products
Maxim Integrated Produc...
|
| CAT1027 CAT1026 |
Dual Voltage Supervisory Circuit with I2C Serial 2K CMOS EEPROM, Auxiliary Voltage Monitor, Watchdog Monitors WDI Pin
Dual Voltage Supervisory Circuit with I2C Serial 2K CMOS EEPROM, Reset Active High & Low, Auxiliary Voltage Monitor
|
Catalyst Semiconductor
|
